Système de fermentation par lots de biogaz

Le système RITTER de fermentation par lots de biogaz permet d'étudier les processus de fermentation avec jusqu'à 16 bouteilles de fermentation à température uniforme dans un four de chauffage en même temps et de procéder à des mesures automatiques avec acquisition de données en temps réel.

Table of Contents

The next generation: BBFS 4.0

Features

Lots jusqu’à …

  • 18 RITTER PMMA Bouteilles de fermentation (0.5 / 1 / 2 ltr) et 18 RITTER MilliGascounters dans complètement nouveau RITTER Four de chauffage Type BBFS-18
  • 9 RITTER PMMA Bouteilles de fermentation (0.5 / 1 / 2 ltr) et 9 RITTER MilliGascounters dans complètement nouveau et plus compact RITTER Four de chauffage Type BBFS-9

Acquisition automatisée des données du volume de gaz et du débit des systèmes de fermentation par lots de biogaz grâce à l’enregistrement des données en temps réel avec Windows® Logiciel »RIGAMO« (convient pour jusqu’à 18 MilliGascounters RITTER).

Calibration volumétrique individuelle de chaque MilliGascounter traçable au Norme primaire nationale allemande (PTB)

  • Affichage graphique et tabulaire, impression et stockage des données de mesure.
  • Exportation des données stockées vers Microsoft Excel®.
RITTER Absorptions-Flasche mit innovativem Tauchrohr-Design
New! Now with innovative RITTER immersion tube design for a CO2 absorption of more than 99%!
And now with the completely new RITTER PMMA fermentation bottles in several sizes and completely gastight!

Introduction

Maximum precise measurement results with individually calibrated RITTER MilliGascounters

In the field of the biogas research the RITTER MilliGascounter became a cent­ral component of a system allowing investigation of fermentation processes with up to 18 fermentation bottles in a heating oven at the same time. This RITTER Biogas Batch Fermentation System enables automatic measurement with data acquisition in real time.

The primary advantage of the RITTER Biogas Batch Fermentation System is that the entire fermentation bottle is uniformly tempered inside the heating oven. In contrast to tempering the fermentation bottles in a water bath there will be no uncontrolled cooling of the upper half of the bottles by air and air currents. The Fermentation Bottles can be easily removed from the top of the heating oven for visual inspections even while fermentation is in progress.

Preconfigured packages

The RITTER Biogas Batch Fermentation System is available as a package for 9 or 18 fermentation bottles.

Regular 18x

  • 1x RITTER heating oven type BBFS-18
    with integrated control unit for 18 stirring units
  • 18x MilliGascounters MGC-1 PMMA
  • 18x RITTER PMMA fermentation bottle 1 ltr with stirring unit
  • 1x RITTER Rack for placing of MilliGascounters and absorption bottles
  • 1x Data acquisition software »RIGAMO« 18-Channel
  • 1x Signal-Interface-Modul (»SIM«)
    18-Channel for data conversion into USB signal
  • 1x Complete set of gas tubes and electrical connection cables

Compact 9x

  • 1x RITTER heating oven type BBFS-9
    with integrated control unit for 9 stirring units
  • 9x MilliGascounters MGC-1 PMMA
  • 9x RITTER PMMA fermentation bottle 1 ltr with stirring unit
  • 1x RITTER Rack for placing of MilliGascounters and absorption bottles
  • 1x Data acquisition software »RIGAMO« 9-Channel
  • 1x Signal-Interface-Modul (»SIM«)
    9-Channel for data conversion into USB signal
  • 1x Complete set of gas tubes and electrical connection cables

Discover the RITTER Biogas Batch Fermentation System components now