Modular sensor design
Analyse up to 4 different gases plus pressure and humidity simultaneously In order to adapt gas analysis as flexibly as possible to individual measurement tasks, the single components were designed modularly. This resulted in a »modular system« in which the various photometric components such as detectors, emitters, measuring sample cell, etc. can be assembled user-specifically.
With this sophisticated sensor design, customer-specific applications can be realized without needing a completely new development. The modularity makes replacement and maintenance considerably easier when servicing is required. In contrast to this design, common completely glued gas sensors can only be replaced as a complete unit thus generating high follow-up costs (total cost of ownership) in case of maintenance. Optionally, modules can also be equipped with a sensor for oxygen, pressure and humidity.
Have a look at our brand new RITTER MultiGas Sensors brochure!
Configurations and measurement ranges
Table of measurement ranges
Measuring ranges / Full scale value (F.S.) | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100 Vol.% | 50 Vol.% | 30 Vol.% | 20 Vol.% | 10 Vol.% | 5 Vol.% | 1 Vol.% | 5,000 ppm | 2,000 ppm | 1,000 ppm | 500 ppm | 300 ppm | 100 ppm | 50 ppm | 10 ppm | |
CO2 | |||||||||||||||
CO | |||||||||||||||
N2O | |||||||||||||||
CH4 | |||||||||||||||
CnHm* | |||||||||||||||
CF4 | |||||||||||||||
SF6 | |||||||||||||||
H2O | Measurement ranges on request | ||||||||||||||
O3 | |||||||||||||||
CL2 | |||||||||||||||
H2S | |||||||||||||||
SO2 | |||||||||||||||
NO2 | |||||||||||||||
NO |
Infrared module NDIR Ultraviolet module NDUV Ultraviolet module NDUV / UVRAS
* Calibration with Propane
Table of Detection Limits
Detection Limits / % of Full Scale Value (F.S.) | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100 Vol.% | 50 Vol.% | 30 Vol.% | 20 Vol.% | 10 Vol.% | 5 Vol.% | 1 Vol.% | 5,000 ppm | 2,000 ppm | 1,000 ppm | 500 ppm | 300 ppm | 100 ppm | 50 ppm | 10 ppm | |
CO2 | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,3% | < 0,3% | |||
CO | < 0,2% | < 0,2% | < 0,2% | < 0,2% | < 0,2% | < 0,2% | < 0,2% | < 0,3% | < 0,5% | < 0,5% | |||||
N2O | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,3% | |||||||
CH4 | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,3% | < 0,5% | ||||||
CnHm* | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,2% | < 0,2% | < 0,2% | < 0,5% | < 0,5% | ||||||
CF4 | < 0,2% | < 0,2% | < 0,2% | ||||||||||||
SF6 | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,5% | < 0,3% | < 0,3% | ||||||||
H2O | Measurement ranges on request | ||||||||||||||
O3 | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,5% | < 0,5% | < 0,5% | ||||||||
CL2 | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,5% | ||||||
H2S | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,5% | |||||||||
SO2 | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,1% | < 0,5% | < 0,5% | < 0,5% | ||||
NO2 | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,2% | < 0,5% | < 0,5% | < 0,5% | |||||||
NO | < 0,1% | < 0,1% | < 0,1% | < 0,2% | < 0,2% |
Infrared module NDIR Ultraviolet module NDUV Ultraviolet module NDUV / UVRAS
* Calibration with Propane
Definition of Detection Limit
The Detection Limit is the smallest measurement value which can be obtained with a specific uncertainty. This uncertainty includes the resolution, noise and stability of the gas sensor for a specific gas and specific measurement range. For evaluation of the detection limit value, several single measurements are taken at the identical measurement conditions. With the obtained single measurement results the standard deviation “Sigma” (σ) is calculated. The values given in the table equal the triple amount of Sigma.
Available arrangements
Arrangement | Sensor 1 (*) | Sensor 2 (*) | Sensor 3 (*) | Options / Addiotional sensors (**) | |||
---|---|---|---|---|---|---|---|
MultiGas mono 1 Sensor + options | 1.1 | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | O2 | P | H | ||
1.2 | O3 CL2 H2S SO2 NO2 | O2 | P | H | |||
MultiGas duo 2 Sensors + options | 2.1 | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | O2 | P | H | |
2.2 | O3 CL2 H2S SO2 NO2 | O3 CL2 SO2 NO2 | O2 | P | H | ||
2.3 | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | O3 CL2 SO2 NO2 | O2 | P | H | ||
MultiGas trio 3 Sensors + options | 3.1 | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | O2 | P | H |
3.2 | CO2 CO N2O CH4 CnHm* CF4 SF6 H2O | O3 CL2 SO2 NO2 | O3 CL2 SO2 NO2 | O2 | P | H | |
3.3 | SO2 | NO2 | NO | O2 | P | H |
(**) P = pressure, H = humidity
Modules built into table-top casing – Product Descriptions
MultiGas NDIR Infrarot-Modul
MultiGas NDUV Ultraviolett-Modul
MultiGas NDUV / UVRAS Ultraviolett-Modul
MultiGas Ultraviolet Module NDUV H2S
MultiGas NDIR+NDUV Infrarot- plus Ultraviolett-Modul
Technologies
EC-Sauerstoffsensor
Der O2.sens von Wi.Tec basiert auf einem elektrochemischen Verfahren. Bei diesem Verfahren findet eine chemische Reaktion mit dem zum messenden Sauerstoff und einem flüssigen Elektrolyten statt. Bei dieser Reaktion werden …
Feuchtesensor
Der HUMI.sens® basiert auf einem kapazitiven Feuchtesensor. Dieser Sensor besteht aus einem hygroskopischen Polymermaterial, in das sich der Wasserdampf aus dem Messgas einlagert. Durch diese Einlagerung verändert sich die dielektrische …
IR-Fotometrie
Im infraroten Spektralbereich lassen sich die unterschiedlichen Gase zwischen 2µm bis 12µm bzw. 14µm erfassen. Dieser Spektralbereich ist wesentlich größer als der UV-Bereich, so dass sich dort auch viel mehr …
UV-Fotometrie
Die UV-Fotometrie basiert auf der Absorption von Strahlung im Spektralbereich zwischen 200nm und 400nm. In diesem Bereich haben einige wichtige technische Gase eine ausgeprägte Absorptionsbande. Vorteilhaft ist bei dieser Art …