过滤器-逆止阀组合 · 数据表
General
During measuring operations with the RITTER MilliGascounter, the gas inside the counter flows through a capillary with an inner diameter of 0.4 mm. Particles and other contaminations can block this thin capillary. To prevent any possible blockage, a Filter-Check Valve Combination can be provided by RITTER.
Parts
The Filter-Check Valve Combination consists of the following parts:
From left to right:
Installation
This combi module is delivered in a pre-mounted configuration:
The arrow indicates the gas flow direction.
The module must be installed in the gas tube in front of the MilliGascounter. Simply push the tube coming from the gas source onto the left hose barb. Push another (short piece) of tube onto the right hose barb and connect this tube to the MilliGascounter according the MGC Manual.
Replacement Parts
For replacement parts please check with your national Distributor or RITTER directly.
V 2.0 / Rev. 2023-03-15 / 如有变更以新版为准。
https://dlr.ritter.de/zh-hans/%E8%BF%87%E6%BB%A4%E5%99%A8-%E9%80%86%E6%AD%A2%E9%98%80%E7%BB%84%E5%90%88/
Dr.-Ing. RITTER Apparatebau GmbH & Co. KG · Coloniastrasse 19-23 · D-44892 Bochum · 德国
如有疑问,请联系 mailbox@ritter.de 或您当地的分销合作伙伴 (在我们的概述页面上)