Modular sensor design
Analyse up to 4 different gases plus pressure and humidity simultaneously In order to adapt gas analysis as flexibly as possible to individual measurement tasks, the single components were designed modularly. This resulted in a »modular system« in which the various photometric components such as detectors, emitters, measuring sample cell, etc. can be assembled user-specifically.
With this sophisticated sensor design, customer-specific applications can be realized without needing a completely new development. The modularity makes replacement and maintenance considerably easier when servicing is required. In contrast to this design, common completely glued gas sensors can only be replaced as a complete unit thus generating high follow-up costs (total cost of ownership) in case of maintenance. Optionally, modules can also be equipped with a sensor for oxygen, pressure and humidity.
Have a look at our brand new RITTER MultiGas Sensors brochure!
Configurations and measurement ranges
Table of measurement ranges
Table of Detection Limits
Available arrangements
| Arrangement | Sensor 1 (*) | Sensor 2 (*) | Sensor 3 (*) | Options / Addiotional sensors (**) | |||
|---|---|---|---|---|---|---|---|
| MultiGas mono 1 Sensor + options | 1.1 | O2 | P | H | |||
| 1.2 | O2 | P | H | ||||
| MultiGas duo 2 Sensors + options | 2.1 | O2 | P | H | |||
| 2.2 | O2 | P | H | ||||
| 2.3 | O2 | P | H | ||||
| MultiGas trio 3 Sensors + options | 3.1 | O2 | P | H | |||
| 3.2 | O2 | P | H | ||||
| 3.3 | O2 | P | H | ||||
(**) P = pressure, H = humidity
Modules built into table-top casing – Product Descriptions
MultiGas ماژول مادون قرمز NDIR
MultiGas Ultraviolet Module NDUV
MultiGas Ultraviolet Module NDUV / UVRAS
| NO / NO2 / SO2 / H2S |
MultiGas Ultraviolet Module NDUV H2S
MultiGas Infrared plus Ultraviolet Module
| CO2 / CO / NO / CH4 / CnHm / N2O |
| SO2 / NO2 / O3 / CL2 / H2S |
Technologies
Feuchtesensor
Überblick Der HUMI.sens® basiert auf einem kapazitiven Feuchtesensor. Dieser Sensor besteht aus einem hygroskopischen Polymermaterial, in das sich der Wasserdampf aus dem Messgas einlagert. Durch diese Einlagerung verändert sich die …
IR-Photometry
Within the infrared spectral range between 2 µm to 12 µm or 14 µm the IR photometry can detect different gases. This spectral range is much larger than the UV …
Oxygen Sensor
The O2.sens from Wi.Tec is based on an electrochemical process. In this process, a chemical reaction takes place with the oxygen to be measured and a liquid electrolyte. In this …
UV-Photometry
The UV photometry is based on the absorption of radiation in the spectral range between 200nm and 400nm. In this area, some important technical gases have a pronounced absorption band. …